Preventative Measures: Knowing Your Water Shut-Off Valve Positions
Preventative Measures: Knowing Your Water Shut-Off Valve Positions
Blog Article
We have stumbled on this article on 3 Ways to Defend Your Home for Possible Water Damage below on the internet and thought it made perfect sense to talk about it with you on this site.
The plumbing system of your residence is an intricate network of pipes and also shut-off valves. In the event of an emergency, you can reduce the water making use of the valves.
Why Must I Stress over This?
Specialist servicemen will close off these valves when there are repair work in neighborhood lines. For example, your shower room sink is malfunctioning, so you can conveniently find the shut-off valve underneath the sink. For significant leaks, you should shut the mainline shut-off shutoff. It is also good technique to turn this off if you will be away for getaway.
The longer you wait to shut the shut-off shutoff, the a lot more substantial the damages will be. You may not have enough time to figure out how to close the shutoffs when you're stressing in the middle of an emergency.
What Does the Shut-Off Valve Look Like?
This is generally a handle that permits you to turn off the water for a specific device, a local location (as an example the entire second floor), or for the whole property. It is vital to recognize where these shutoffs are, so when something emerge in any type of area of your home, you can shut it as soon as possible. This will certainly assist you stay clear of substantial water damages that will certainly set you back thousands to repair.
Where are These Found?
Your best wager is to call a water remediation solutions company for assistance. If you have a rather moderate-sized house, attempt looking for a knob or bar.
Commonly, home builders mount the shutoffs near or within the main, ground-floor restrooms. The valves are intended to be noticeable, some pick to camouflage them for aesthetic reasons.
When to Call an Expert?
Need to the aforementioned be the case for your localized valves, you have no other choice but to shut off the main water line, cutting the source of water in your entire residence. After that call the plumber to evaluate the trouble and also shut down the shutoff because area only so you can make use of the rest of the plumbing in other areas of your home.
Bear in mind, these shutoffs are lifesavers as well as important for any plumbing repair service. In the event of a plumbing emergency, closed down these shutoffs to prevent difficulties that call a trustworthy water damages restoration carrier.
The plumbing system of your house is a detailed network of pipelines and shut-off shutoffs. In the occasion of an emergency, you can cut the water making use of the valves. The longer you wait to shut the shut-off valve, the extra comprehensive the damage will certainly be. It is crucial to understand where these valves are, so when something crops up in any kind of area of your home, you can close it right away. In the occasion of a plumbing emergency, shut down these shutoffs to prevent issues that call a trusted water damage reconstruction supplier.
WHERE IS MY MAIN WATER SHUT OFF VALVE?
Do you know where the main water shut-off valve is in your home? Do you know what it looks like? If you can’t answer that question within five seconds, it’s important to know where and how. At David Gray Plumbing, we know every second counts with a serious leak in your home.
When water starts rushing, you will need to know quickly where to go and what to do. Otherwise, you could end up with a plumbing nightmare on your hands…
What does a main shut off valve look like?
Main shut off valves can be in two different styles:
Gate Valve – this has a dial (round handle). Slowly turn the handle clockwise (to the right) to close it. When you turn the handle, do not apply excessive force or jerk the handle. This can bend and damage the gate or snap the valve stem causing the valve to break in either the open or closed position.
Ball Valve - A ball valve has a lever (long handle). If the lever is in line with the pipe, then the valve is open. If the lever is perpendicular to the top, the valve is closed. Remember, when opening or closing these valves, go slowly.
Important Note: When a valve is quickly closed on water moving at high pressure through pipes, it can cause shock waves through the plumbing that create a hammering sound. Under high enough pressure, water hammer can cause a pipe to weaken and break. For that reason, turn the ball valve lever slowly to avoid damage from water hammer.
Where to find the main shut-off valve
Most homes have one main valve and a second shut off for just the water heater.
On the front yard-side of the house, you will find the main shut off valve under the water hose connection. This valve will shut down the whole house water supply.
Sometimes the main shut off valve is in the same area above, just buried in the ground.
Are you in a condo? It is typically located by the water heater.
When purchasing your home, an inspection report is supplied including the location in the plumbing section of the report. It may include a photo of the valve for you.
Your fixture might have a separate shut off valve
Valves on fixtures need extra gentle hands and if you need to close one, be extremely careful. Our senior technician tells us, “8 out of 10 of these stop valves will be seized up and won’t work”. If you try to force it closed, it will break.
All valves should be exercised a few times per year to prevent this. Also, installing a water softener will extend the life of valves and any other fixtures in the home such as water heaters, faucets and dishwashers.
https://www.davidgrayonline.com/blog/where-is-my-main-water-shut-off-valve/
I ran across that piece on 3 Simple Strategies to Prevent Damage from Showers and Storms while scouting around the internet. Loved our piece? Please share it. Help others discover it. We thank you for reading our article about 3 Effective Methods to Protect Your Home for Potential Water Damage .
View More Report this page